PARAMETERS AUTHENTICATION OF LARGE ASYNCHRONOUS ENGINE FOR PUMP DRIVE WITH RETORT PROFILE SLOTS OF ROTOR

Pavel Khristo

Abstract


It was conducted a calculation of the parameters of the T-shaped equivalent circuit of a large asynchronous engine with the use of precise G-shaped equivalent circuit for nominal data and some characteristic sizes of the machines. It was chosen the calculation method of the control value of the multiplicity of a critical moment on the basis of a comparison of different options to determine this value was done. It was obtained a dependence of the multiplicity of the critical moment from the estimated value of the magnetizing current, taking into account the effect of displacement and saturation of leakage flux flow of stator and rotor windings due to the analytical interpretation of graphical method for finding the critical moment of the pie chart on the basis of experimental data of idle speed experiment and three experiments with short circuit.


Keywords


asynchronous engine; exact equivalent circuit; displacement of the rotor current; flask-shaped rod of the squirrel cage; saturation of leakage flux flow; critical moment; idle speed experiment; short circuit experiment; pie chart

Full Text:

Figures

References


Khristo, P. E. (2015). Energosberegayuschee upravlenie glavnyimi nasosami suhogo doka [Energy-saving control of a dry dock dewatering pumps], Scientific and Technical Journal Electrotechnic and computer systems, Publishing house «Technique», Kyiv, 19(95), 154–159.

Kopyilov, I. P., Klokov, B. K. (1988). Spravochnik po elektricheskim mashinam: [Reference book on electric machines: In two volumes. V.1.], Мoscow: Energoatomizdat, Vol. 2, T. 1, 456.

Neyman, Z. B., Pekne, V. Z., Moz, L. S. (1974). Krupnyie vertikalnyie elektrodvigateli peremennogo toka. [Large vertical electric motors of alternating current.], Мoscow, Energy, 376.

Sokolov, R. I. (1988). Ekspluatatsiya i remont krupnyih vertikalnyih elektrodvigateley. [Ex-ploitation and repair of large vertical electric motors.], Мoscow: Energoatomizdat, 112.

Radin, V. I., Bruskin, D. E., Zorohovich, A. E. (1988). Elektricheskie mashinyi: Asinhronnyie mashinyi: Ucheb. dlya elektromeh. spets. vuzov [The Electric machines: the Asynchronous machines: Studies. for electro-fur. special. institutes / of higher], Мoscow: Vyissh. Shk., 328.

Sivokobyilenko, V. F., Pavlyukov, V. I. (1979). Raschet parametrov shem zamescheniya i pus-kovyih harakteristik glubokopaznyih asinhronnyih mashin. [Calculation of parameters of charts of substi-tution and starting descriptions of deep slot of asynchronous machines], Electricity, 10, 35–39.

Voldek, I. I. (1978). Elektricheskie mashinyi. Uchebnik dlya studentov vyissh. tehn. uchebn. zavedeniy. 3-e izd., pererab. [Electric machines. Textbook for the students of higher technical educational establishments. it is a 3th publ., it is processed.], L.: Energy, 832.

Kostenko, M. P., Piotrovskiy, L. M. (1973). Elektricheskie mashinyi. V 2-h ch. Ch. 2 – Mashinyi peremennogo toka. Uchebnik dlya studentov vyissh. tehn. ucheb. zavedeniy. Izd. 3-e, pererab. [The Electric machines. In two parts. Part. 2 are Machines of alternating current. Textbook for the students of higher technical educational establishments. Edition third, processed.], L., Energy, 648.

Schuisky, W. (1933). Die Stromverdrangungsmotoren. «Archiv für Electrotechnik»,

Bd XXVII.

Kuznetsov, B. (1940). Current diagram of a deep slot engine and Boushero engine from of idling and short circuit experience data, Electricity, 1.




DOI: http://dx.doi.org/10.21303/2461-4262.2015.00010

Refbacks

  • There are currently no refbacks.


Bookmark and Share


Copyright (c) 2015 Pavel Khristo

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

ISSN 2461-4262 (Online), ISSN 2461-4254 (Print)