DETERMINATION OF THE ERROR OF MEASURING THE HEIGHTS OF THE OBJECTS DURING THE AUTOMATIC PROCESSING OF STEREO PICTURES

Oleksandr Dubyna

Abstract


Currently, information on the spatial description of objects is used in many areas of human activity. One of these types of information is the coordinates of objects. Such data are used in cartography, in the construction of digital maps and 3D models, for the operation of navigation aids, etc. In the automated creation of digital models of terrain relief, one of the main qualitative indicators is the accuracy of determining the height of objects. The main influence on this indicator is made by the parallax measurement error when processing stereo images. To obtain a formula for calculating the accuracy of measuring the height of objects, let’s use the expansion of the function in a Taylor series. Using the Cramer-Rao formula for the potential accuracy of measuring the coordinates of the image of the object in the image, the Fourier transform and Parseval's equality, the formula for the potential accuracy of combining stereo images (parallax measurements) is obtained. The analysis of the obtained formulas shows that the image alignment accuracy deteriorates with an increase in the noise power spectral density in the first and second images and a decrease in the similarity of one image to another, as well as with a decrease in the effective width of the mutual spatial spectrum of stereo images. As the value of the stereo recognition basis increases, the error in measuring the heights of objects first improves, and then worsens. This deterioration is due to the fact that stereo pair images are obtained from different spatial points and at the same time perspective distortions and distortions in relief appear on the images. Accordingly, with an increase in the basis of shooting, these distortions will increase. This approach can be used when planning the mode of stereo shooting and equipment for removing the earth's surface for mapping, obtaining 3D models, etc.


Keywords


photogrammetry; height of objects; accuracy of obtaining the coordinates of objects; stereo images; parallax; correlation-extreme method

Full Text:

PDF

References


Vollmerhausen, R. H., Reago, D. A., Driggers, R. G. (2010). Analysis and Evaluation of Sampled Imaging Systems. SPIE Press. doi: https://doi.org/10.1117/3.853462

Pavlenko, L. A. (2013). Heoinformatsiyni systemy. Kharkiv: Vyd. KhNEU, 260.

Aelterman, J., Goossens, B., Pizurica, A., Philips, W. (2009). Suppression of Correlated Noise. Recent Advances in Signal Processing. doi: https://doi.org/10.5772/7446

Krasnopevtsev, B. V. (2008). Fotogrammetriya. Moscow: UPP "Reprografiya" MIIGAiK, 160.

Fisenko, V. T., Fisenko, T. Yu. (2008). Komp'yuternaya obrabotka i raspoznavanie izobrazheniy. Sankt-Peterburg: SPbGU ITMO, 192.

Serra, J. (2010). Image Analysis and Mathematical morphology. Academic Press.

Gorshenin, A. E., Petrozhalko, V. V., Dubina, A. F. (2011). Metodyka otsiniuvannia yakosti kosmichnykh znimkiv pry yikh vykorystanni dlia deshyfruvannia shtuchnykh obiektiv dystantsiynoho zonduvannia Zemli. Visnyk ZhDTU. Seriya: Tekhnichni nauky, 1 (56), 37–43.

Holub, V., Fridrich, J. (2012). Designing steganographic distortion using directional filters. 2012 IEEE International Workshop on Information Forensics and Security (WIFS). doi: https://doi.org/10.1109/wifs.2012.6412655

Baklitskiy, V. K. (2009). Korrelyatsionno-ekstremal'nye metody navigatsii i navedeniya. Tver': Knizhniy klub, 860.

He, Q., Wang, J. (2012). Effects of multiscale noise tuning on stochastic resonance for weak signal detection. Digital Signal Processing, 22 (4), 614–621. doi: https://doi.org/10.1016/j.dsp.2012.02.008




DOI: http://dx.doi.org/10.21303/2585-6847.2019.001032

Refbacks

  • There are currently no refbacks.


Copyright (c) 2019 Oleksandr Dubyna

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

ISSN 2585-6847 (Online), ISSN 2585-6839 (Print)