THE TURBINE ENGINE BLADES STRESS-STRAIN STATE UNDER THE VIBRATION LOAD

Serhii Morhun

Abstract


The problem of turbine engines blades stress-strain state has been studied. All calculations have been provided for the cooled blades constructions, used in the turbo machinery manufacturing. The investigation’s purpose was to develop the new adaptive mathematical model of turbine engine bladed disks with circular damping links stress-strain state by means of finite elements method. The foregoing approach to the finite elements method was borrowed from the literature on finite elements method. The main mathematical models and some types of the finite elements can’t be used for the correct description of the foregoing problem. The matter is that turbine blades have constructional non-homogeneity, which hardly ever could be correctly explained, using well-known finite elements and their mathematical dependences. On the other hand the variable aerodynamic force influence has also been taken into consideration. That is why the new model, which consists of sections, including disk’s sector, the whole blade and parts of damping links, has been developed. The finite elements methodology has been used for the dynamic stresses of this section calculation. Such approach gives an opportunity to describe the stress-strain state of the whole bladed disk as the superposition of the developed sections

Keywords


turbine blades; geometrical parameters; constructional non-homogeneity; stress-strained state; vibration load; finite elements method

Full Text:

PDF

References


Vorob'ev, Yu. S. (1988). Kolebaniya lopatochnogo apparata turbomashyn [The turbine engines blading oscillations]. Kyiv, 224.

Perkins, F. W., Cromack, D. E. (1978). Wind Turbine Blade Stress Analysis and Natural Frequencies. Reports. 11. Wind Energy Center Reports, 143.

Sosunov, V. A., Chepkin, V. M. (2003). Teoriya, raschet i proektirovanie aviatcionnyh dvigateley i energeticheskih ustanovok [The theory and practice of aircraft engines and power plants calculations]. Мoscow, 677.

Kostyuk, A. G. (2009). Dinamika i prochnost’ turbomashyn [The turbines dynamic and strength]. Moscow, 264.

Pykhalov, A. A., Milov, А Е. (2007). Staticheskiy i dinamicheskiy analiz sbornyh rotorov turbomashin [The turbine engines sectional rotors static and dynamic analysis]. Irkutsk, 194.

Samaras, C. (2009). Emissions and lifetime estimation modeling of industrial gas turbines. M. Sc. Progress Review, Cranfield University, UK, 30.

Krishnakanth, P. V., Narasa Raju, G. (2013). Structural and Thermal Analysis of Gas Turbine Blade by using FEM. International Journal of Scientific Research Engineering and Technology, 2 (2), 60–65.

Vasilyev, B. (2012). Prediction of the kinetics of the 3D stress-strain state of high temperature gas turbine blades with limited experimental data. 28th International Congress of the Aeronautical Sciences, 8.

Morgun, S. (2016). The blades constructions finite elements models development. Bulletin of the National Technical University «KhPI» Series: New Solutions in Modern Technologies, 42 (1214), 86–91. doi: 10.20998/2413-4295.2016.42.14

Samarskiy, A. A., Vabitcevich, P. N. (2009). Vychislitel’naya teploperedacha [Computational heat transfer]. Мoscow, 784.




DOI: http://dx.doi.org/10.21303/2585-6847.2017.00478

Refbacks

  • There are currently no refbacks.


Copyright (c) 2017 Serhii Morhun

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

ISSN 2585-6847 (Online), ISSN 2585-6839 (Print)